ansoftdesigner3.5crack

sdytscs

好的，不过我只设计无源方面的，对功放没什么研究哈:cra :cosmo

hankerer

原帖由 sdytscs 于 2007-6-9 09:29 AM 发表

                               
登录/注册后可看大图

好的，不过我只设计无源方面的，对功放没什么研究哈:cra :cosmo

哪个方面都行的.我也只是搞无源的.

d9527

emule哪里啊？我在上面搜索了好久，就是没看到3.5的，最新的也就2.2。麻烦给我网址吧，谢谢

bandwidth

ansoft desiger3.5 有什么好的性能啊

zyl200503

fuz老兄，聪明呀！！！

navyliu

好东西大家分享阿，我刚下载了，正准备安装呢:blush

giga

RELEASE NOTES
-------------

Issues corrected in V3.5.2
--------------------------
- Additional definition management script methods
- Improved ability to abort long DRC runds
- Crash fixed when calculating planarEM near fields with coax ports
- Prevent a crash if material not defined in layout
- Prevent memory overwrite when running circuit or system swept analysis
- System/Nexxim cosimulation would not always simulate Nexxim sub-circuit
- System/Nexxim cosimulation would appears to hang
- Spice export using incorrect lowest frequency
- Passivity check when exporting HSPICE would crash
- Crash when updating MonteCarlo plots
- System engine crash with three pin devices
- Envelope with 2 tone hb bug ?transient does not match envelop results
- PlanarEM ports not getting pre-processed
- PlanarEM CPW port problem


Issues corrected in V3.5.1
--------------------------
- Nexxim current sources not netlisted correctly
- Nexxim S parameters not extracted correctly when global
   variables were used
- Nexxim could not plot currents correctly when doing LNA
- Nexxim data incorrect when doing loadpull from netlist designs
- Three DRC script commands were not accessible to users
- DRC was not correctly honoring hierarchy
- DRC was not doing single layer 揳nd?correctly
- PlanarEM push excitations not correct
- PlanarEM near field excitations not set correctly for ports with multiple arms
- PlanarEM phase animation of far field not working properly
- PlanarEM Ez & Hz near field calculation & display incorrect
- PlanarEM memory leak when doing FSS problems
- PlanarEM tolerance problem in loop tree
- PlanarEM meshing problem with via & cross layer plates
- Circuit-to-Nexxim translation table expanded
- Circuit-to-Nexxim translator switching terminals incorrectly
- Circuit-to-Nexxim translator not treating subcircuits correctly
- Symbol images flipped left/right in the symbol library browser
- Crash when footprint layer mapping was changed from 3D view
- Materials not read correctly in ANF files
- Absolute power levels in dynamic link push excitations not correct
- Dynamic Link Variables not working correctly for HFSS transmission
   lines using "ports only" solutions
- Data not interpolated correctly when analyzing HFSS linked transmission
   line problems   
- Memory overwrite when reading certain GDSII files
- Data table crash when the data table was not symmetric but user
   transposed the table

ban88

系統仿眞软件~这套我還沒有使用过!
感谢楼主無私!!呆會就去下载Designer3.5