用ADS如何给介质谐振腔振荡电路建模？

lswluo

谢谢支持！
能把你的仿真资料发给我学习一下吗？

lesbian

foxman太太太强了，对ads和cst运用的非常熟练阿，佩服得五体投地阿

foxman

原帖由 lswluo 于 2008-12-13 14:04 发表

                               
登录/注册后可看大图

谢谢支持！
能把你的仿真资料发给我学习一下吗？

請問你是指哪部份 ? EMDS那部份嗎 ?
現在我這個議題的仿真资料已達 >700MB 壓縮後大約是 200MB：18de

試試這樣行不....
你要先在ADS中新建一個 project....
然後將我的 networks 壓縮包中的所有文檔放入你新建的project \ networks裡, 再去調用..

chip capacitor 你若無 panasonic components library..可以使用其它方的..(但我原圖裡的panasonic capacitor 你要刪除)
先試試看有問題再討論了.

[ 本帖最后由 foxman 于 2008-12-13 17:03 编辑 ]

lswluo

打开有报错，估计是版本太低 2005A。

foxman

原帖由 lswluo 于 2008-12-13 18:09 发表

                               
登录/注册后可看大图

打开有报错，估计是版本太低 2005A。

原來是 2005A ! 難怪你一直以為 EMDS 是外加....其實在 2008之後, EMDS都已是內建了..
換個 2008U1 或 U2 吧 .........(u1 & u2 都有 64位的 PJ, 建議在 windows pro XP 64 或 Windows server 2003 64上運算,效率較高)

lswluo

看来有必要换新版本了，只是硬盘上的容量满了，想买个新的移动盘学校不批，郁闷中。

tonyyu

:11bb :27bb :29bb :27bb :27bb :27bb :27bb :27bb

lswluo

在3D EM PreView时出现如下问题，估计是Layer的对应关系不对。

Port number 14:

one or more ports in the layout were drawn on layer 0 ("default").
Layer 0 is not a valid layer for Momentum layouts !

Port number -3:

one or more ports in the layout were drawn on layer 0 ("default").
Layer 0 is not a valid layer for Momentum layouts !

Port number -4:

one or more ports in the layout were drawn on layer 0 ("default").
Layer 0 is not a valid layer for Momentum layouts !

Port number 15:

one or more ports in the layout were drawn on layer 0 ("default").
Layer 0 is not a valid layer for Momentum layouts !

Port number 11:

one or more ports in the layout were drawn on layer 0 ("default").
Layer 0 is not a valid layer for Momentum layouts !

Port number 7:

one or more ports in the layout were drawn on layer 0 ("default").
Layer 0 is not a valid layer for Momentum layouts !

Port number 12:

one or more ports in the layout were drawn on layer 0 ("default").
Layer 0 is not a valid layer for Momentum layouts !

Port number 13:

one or more ports in the layout were drawn on layer 0 ("default").
Layer 0 is not a valid layer for Momentum layouts !

Port number 6:

one or more ports in the layout were drawn on layer 0 ("default").
Layer 0 is not a valid layer for Momentum layouts !

Port number 10:

one or more ports in the layout were drawn on layer 0 ("default").
Layer 0 is not a valid layer for Momentum layouts !

Port number 9:

one or more ports in the layout were drawn on layer 0 ("default").
Layer 0 is not a valid layer for Momentum layouts !

Port number 8:

one or more ports in the layout were drawn on layer 0 ("default").
Layer 0 is not a valid layer for Momentum layouts !

Port number 14:

one or more ports in the layout were drawn on layer 0 ("default").
Layer 0 is not a valid layer for Momentum layouts !

Port number -3:

one or more ports in the layout were drawn on layer 0 ("default").
Layer 0 is not a valid layer for Momentum layouts !

Port number -4:

one or more ports in the layout were drawn on layer 0 ("default").
Layer 0 is not a valid layer for Momentum layouts !

Port number 15:

one or more ports in the layout were drawn on layer 0 ("default").
Layer 0 is not a valid layer for Momentum layouts !

Port number 11:

one or more ports in the layout were drawn on layer 0 ("default").
Layer 0 is not a valid layer for Momentum layouts !

Port number 7:

one or more ports in the layout were drawn on layer 0 ("default").
Layer 0 is not a valid layer for Momentum layouts !

Port number 12:

one or more ports in the layout were drawn on layer 0 ("default").
Layer 0 is not a valid layer for Momentum layouts !

Port number 13:

one or more ports in the layout were drawn on layer 0 ("default").
Layer 0 is not a valid layer for Momentum layouts !

Port number 6:

one or more ports in the layout were drawn on layer 0 ("default").
Layer 0 is not a valid layer for Momentum layouts !

Port number 10:

one or more ports in the layout were drawn on layer 0 ("default").
Layer 0 is not a valid layer for Momentum layouts !

Port number 9:

one or more ports in the layout were drawn on layer 0 ("default").
Layer 0 is not a valid layer for Momentum layouts !

Port number 8:

one or more ports in the layout were drawn on layer 0 ("default").
Layer 0 is not a valid layer for Momentum layouts !

huangfeihong88

顶了啊！支持啊！:27bb